How to charge a battery from an electronic cigarette. Rules for charging an electronic cigarette

In this article, we will analyze all the questions regarding how to properly charge an electronic cigarette. Without charging, your vape device will work offline for a maximum of a day with regular use. But the batteries in an e-cigarette are somewhat different from the power sources of other devices. What is the difference? Let's figure it out.

About charging methods

Pros:

The only advantage of such a charging system is the absence of additional holes and joints on the power supply housing and its compact size.

Minuses:

• The first disadvantage is the need to disassemble the device each time you charge it.
• Another disadvantage is the mandatory presence of a special charger.
• And the last drawback is the inability to use the device while charging.

Micro USB connector

The micro-USB connector charges most of today's electronic cigarette power sources. The convenience and versatility of this scheme is so great that it is used on both pen-style cigarettes and box mods. USB connector for charging is installed in such devices as: Eleaf iJust 3, Ehpro Evok 80, Kanger Kbox 200W.

Pros:

• Versatility and availability. Almost everyone has a cable with a micro-USB connector.
• No need to disassemble the device to charge it.
• On a number of devices with a micro-USB connector, there is a function of vaping while charging.

Minuses:

The objective disadvantage of charging via USB is that not all devices powered by more than one 18650 battery cannot be adequately recharged in this way.

Charging batteries in a separate device

Most of the electronic boards installed in 150W or more e-cigarette mods are not capable of handling battery charging inside the device, as charging two or three 18650 batteries can overheat and burn the board. Therefore, even if such an electronic mod has a micro-USB connector, you need to charge its batteries in an external charger. Some manufacturers specifically include an item in the instructions that says "The micro-USB connector is for software updates only"

External devices for recharging batteries usually work “from the outlet”, since they require more voltage to charge several 18650 batteries at once. Special electronics are installed in such charging stations that fully control the process and make it as high quality as possible.

Some of the most well-known manufacturers producing reliable and high-quality chargers are NItecore and Efest. The chargers released by them meet all the necessary standards and do their job perfectly. To date, the most popular among them are:

- a universal station for powering batteries of different sizes. You can install batteries at the same time different type. The gadget is equipped with all kinds of protections that prevent unpleasant situations when charging the battery. The memory has a compact size, so it won't take up much space in your bag or on your desktop.

Pros:

• The external charger, equipped with the necessary electronics, recharges as correctly as possible, increasing the life of the batteries.
• Externally charged batteries have the same voltage for better performance.
• If you have more than one set of batteries for your device, you can charge the batteries in reserve.

Minuses:

• This method of charging requires an outlet, which is not always convenient.
• The devices are relatively large and it is really inconvenient to carry them around.

How to charge my electronic cigarette?

We have already found out that the charging method depends on the specific model of the Vape device. Modern battery mods and electronic cigarettes with built-in batteries can only be charged via a micro-USB connector. Examples of such devices are Ijust 3, Eleaf Ipower 80W, Tesla Nano 100W TC Steampunk.

Charging the batteries of electronic mods without a micro-USB connector (or if the connector is not designed for charging) is done only in an external charger. Devices of this type: Smoktech Koopor Mini 60W TC, Tesla Invader 3, SMOK GX2/4 KIT. When buying such devices for the first time, do not forget to purchase a charger for them from manufacturers Efest or Nitecore.

The most important question concerns battery mods for two or more batteries that have a USB connector for charging. As mentioned above, it is possible to charge batteries inside such devices, but it is not safe, both for the devices themselves and for you.

Important! Before charging the device, study all the information about your device, which is in the instructions and on the official website of the manufacturer.

Usually, if a vape is equipped with a charging connector and has a power of 100 watts or higher, the manufacturer himself recommends charging the batteries separately, despite the built-in charging system. The clearest example of such a mod is Wismec RX200. There are exceptions to this rule, for example, iStick TC 100W from Eleaf, which, due to the parallel connection of batteries, charges via USB without any problems.

Important! Do not attempt to charge a disposable e-cigarette. As practice has shown, this can cause damage to your health and property! Disposable e-cigarette must be disposed of after use!

Single battery mod: USB or external charging?

Devices powered by a single 18650 battery with a quick-change battery provided can confuse a newbie in vaping, putting him in front of the question “How exactly should the mod be charged?” In fact, there is no difficulty here. The control electronics of small vape devices with a single battery is quite capable of recharging it from almost any USB, and it is not necessary to buy an external charger.

However, if you want to vape non-stop, then to extend the life of the battery, it is certainly better to purchase another battery and charge it externally. This is due to the fact that using the device while charging (the so-called passthrough function), while extremely convenient, somewhat reduces the life of your battery.

What if I don't have a charger?

It also happens that your device is suddenly discharged, and you don’t have a charger with you. In this case, there are several options:

– Carry a microUSB cable with you if your vape device has an appropriate connector. The modern world is filled with various gadgets with a USB socket, and having a cable with you, you can connect to any device that has the function of "return" voltage. Remember that the charge current should not exceed 1 Ampere! - If you use a mechanical mod, then in such a situation, one way out is to carry an additional battery with you, it is better to have several at once, since mechanical mods consume a large amount of energy.

We strongly DO NOT recommend that you use "handicraft" methods of charging the battery (various terminals, wires connected to other power sources). Without special knowledge, you risk damaging the battery or, worse, causing great harm to your health. It is always better to use safe ways to recharge batteries - special chargers.

Summary:

Charging via the 510 connector is an outdated scheme that will inevitably leave the world of vaping in the very near future. The most universal way is to charge the batteries inside the mod via the USB connector. Such a system is used on almost all pen-style electronics and box mods for a single 18650 battery. External charging provides longer service life, faster charging, and safety. Batteries of all mods with a power of 150-200 watts are best charged in special chargers.

Before charging your electronic cigarette, always contact official instructions manufacturer. This is a guarantee of your safety and long service life of the vape device.

The problematic issue, which is the rules for charging an electronic smoking device and the methods that exist for this, is faced by many vapers. Everyone wants to extend the life of the battery.

When does an e-cigarette need recharging?

When a battery device sits down in devices, this cannot be overlooked, since:

• the volume of steam decreases or its production stops completely;
• great efforts are made to perform the tightening;
• the cigarette begins to flow because the smoking mixture does not evaporate completely, due to insufficient energy on the coil element.

First Charge Rules

It should be noted that in a new cigarette, the battery is in a charged state so that it is possible to check the smoking device for functionality. To charge a new battery, it must be completely discharged by using a cigarette until the amount of vapor produced decreases and the indicator lights up confirming the need for charging.

Now the battery needs to be charged and the cycle repeated three times. Such a measure will make it possible to "rock" the smoking device, which will subsequently affect the battery capacity.

Experienced vapers advise putting a new battery on charge for eight hours, then using a cigarette in normal mode, recharging the battery for three to four hours.

Charge level control during operation

In most cases, when the charge of the battery device drops to 13%, the electronic smoking device warns the user of this condition by blinking the LED element. The methods of such information will depend on the device model. For example, in a number of models, the indicator will give a ten-fold light signal.

In cigarettes with a display, such information is displayed on the screen. In this case, the remaining charge is shown as a percentage.

Charging methods

An electronic smoking device is charged in three ways, if you do not take into account the options developed independently:

• there is no need to separate the evaporative part by connecting the unit to an energy source;
• it is allowed to use a cord from other smoking devices;
• there is a special PASS-through functionality that allows the vapers to smoke while recharging the battery.

How long does the charging process take

The time required to charge the battery depends entirely on the battery capacity and the current output of the charger.

If there is a desire to use the charging unit from another cigarette, then it is quite easy to determine the recharge time if you know the special formula T = 1.4 C / I, where:

• T is the time interval in hours during which the battery is fully charged;
• 1.4 - the established coefficient, determined from the average values ​​of the charging efficiency, is used to correct the data;
• C - battery capacity, information about which can be clarified in the instruction manual;
• I is the value of the current supplied by the element for charging.

These data are specified on the label.

Can it be charged without a power supply

Sometimes there are circumstances when the charging unit for a smoking device is broken or it was not included at all in the delivery set.

With usb wire

The wire is connected to the computer, having previously performed a small revision:

• The tip is cut off, the insulation is cleaned. After that, red and black wires are distinguished - “plus” and “minus”.
• A cork is being prepared from a piece of paper, a red wire is stuck into its center so that it peeks out from below by about three millimeters. The cork can be reinforced with electrical tape.
• The clearomizer part is disconnected from the battery, the main contact is found, to which the “plus” is connected, and the “minus” is displayed on the body part.
• The plug is inserted into the battery pack so that the red wire reaches the main contact. The black wire is attached to the body with a clip or clothespin.
• The cable connects to a USB port on a computer.

With a phone adapter

The mouthpiece is taken out of the cigarette, the battery, atomizer, and wick material are carefully removed. Now the phone charging plug is taken, the clamps are cut off and soldered. All this is connected according to the polarity of the wiring, a constant voltage is set on the tester for measurement.

If the arrow reacts, then the connection is made correctly. The clamps are connected to the contacts of the battery device according to the appropriate polarity. After turning on such charging, the battery is charged for three hours. As a rule, such charging itself stops supplying current.

Homemade charging

Some vapers try to create homemade chargers using the elements that are at hand. But you should take into account the indicators of voltage, resistance and current strength so that the battery does not lose its capacity during recharging.

Conclusion

Not every beginner can understand the intricacies of an electronic device. Therefore, it is recommended to immediately purchase a spare battery, which can be used at any time if the main battery is discharged at the wrong time or loses its ability to work.

It should be remembered that the battery is a delicate element of the smoking device. To prolong the period of its operation, it is recommended to organize careful maintenance and follow the operating requirements set out in the instructions for use.

The vape appeared in 2003, and since then hundreds of varieties of devices have been released, differing in appearance, power and battery capacity.

Modern electronic cigarettes are equipped with both manual and automatically activated power sources. The latter work from a chip with a pressure sensor, which is triggered by a “puff”. At the same time, the LED lights up, and voltage is applied to the atomizer. A manual battery differs from an automatic one in that it has a chip with a button. When you press it, the LED turns on, and voltage is applied to the atomizer. The time required for recharging is determined by the capacity of the battery cell being used.

Depending on the appearance vapes are divided into:

• Classic - made in the form of a stick (stick);
• Box mods - the battery compartment looks like a box.

By functionality, such devices are divided into:

• Sets for beginners - have a classic form, are controlled by one button, are often used to get rid of addiction. You can use them without recharging for a day.
• Battery mods - allow you to choose the power and vaping modes. They operate on both removable and built-in batteries.
• Mods with thermal control allow you to additionally set a different incandescent temperature of the evaporative element. Turning on this function consumes power quickly.
• Mechanical mods are devoid of any electronics, therefore they are recommended only for professionals. Due to the lack of protective functions, they can ignite if used incorrectly.

Each modification of the steam generator uses its own power source. It has a certain capacity, on the values ​​of which the duration of continuous soaring directly depends. So let's find out how much the vape charges.

Charging time and power supply capacity

How much to charge a vape?

The recharging time of steam generators is primarily determined by the capacity of the installed battery pack and the amperage of the charger. Information about the charging time is usually indicated in the manufacturer's instructions.

Chargers from Efest have good current output, which means that your batteries are charged in a shorter period of time:

- a product from a Chinese brand that is famous for the high quality of its products. The novelty will delight you with excellent assembly and practicality. There is an informative display on the block, which displays the information necessary for the vaper. The charger charges 18650, 26650 and other battery formats.

Designed to power 18650/26650 batteries. The unit supports the simultaneous charging of two or four batteries, depending on their format. The product is made of durable materials, equipped with protections that make the process of feeding the elements as safe as possible.

Each steam generator is equipped with a special indicator. In budget models, it is built into the power button, more expensive devices display this information on the display. When the battery level is low, the indicator will flash. Some modifications begin to produce little steam.

Over time, the working life of any battery cell decreases. The average energy storage is designed for 500 recharge cycles. Then it becomes unusable and needs to be replaced. Active bathers always stock up on a few extra batteries.

How and how much to charge an electronic cigarette

Each vape comes with its own charger. For inexpensive models, it is screwed onto the battery pack, devices from the middle price category are equipped with a Micro USB input. For versions with removable batteries, the charger must be purchased separately. There are also vape models that are charged from the Power Bank or special devices for removable batteries that allow you to replenish power without using the mains. When the charging is turned on, the indicator will start flashing on it (for more expensive modifications, information is displayed on the display). How to understand that the vape is charged? Once the battery is fully charged, a steady light will appear.

Manufacturers recommend using only original charging devices. Each of them has certain operating parameters. Any electronic cigarette has a complex device. Violation of the manufacturer's recommendations for operation at best will lead to its breakdown, at worst - ignition of the device itself.

For more information on how to protect your device from damage or even ignition, we recommend that you read the article. “ ” .

Vaping is becoming more and more popular, but not everyone who has switched to these fashionable electronic devices knows all the subtleties and nuances of use. How to charge an electronic cigarette and not damage the battery, but, on the contrary, extend its service life? Not every vaper knows about this, and many are faced with the problem of premature failure.

How to do everything right?

If you are attentive to your equipment, then you must definitely know and take into account some rules for charging it. Many are interested in the question of how to charge an electronic cigarette productively and without harm to the battery. In fact, everything is very simple.

Charging an electronic cigarette must be carried out strictly according to the instructions, so read it carefully before using it for the first time.

Almost all vaping units are equipped with LEDs, so study the principle of operation - the diode will always tell you how to act correctly in a given situation, by blinking and the color of the light bulb, everyone will guess what to do. The diode can light up in different colors, blink or not light up at all - you will find an explanation in the instructions. An electronic cigarette is usually charged from the mains, the process is also possible via a USB cable from a computer.

Not everyone knows how to properly charge an electronic cigarette. There are a few basic and mandatory steps to follow here:

• disconnect the atomizer from the main device;
• connect the battery to the charger;
• turn on the device in the network;
• after the battery is charged, disconnect from the mains and screw on the atomizer.

The whole process is very easy, it does not require any special skills or a lot of time. Even for a beginner, it will not be difficult to correctly follow these steps and complete the process.

How much does an electronic cigarette charge - this question worries many. The charging time will depend primarily on the model. Watch the indicator carefully - when fully charged, it will change its color. Do not leave the device on the network for a long time, this can reduce its life and increase the number of problems with it.

The first time is always scary, but not difficult!

How long does it take to charge the device for the first time? This issue is especially relevant, because the first charge is very important and can affect the further operation and life of the battery. You can only find out exactly how long the device takes to charge from the original instructions for use.

If you want to charge an electronic cigarette for the first time, then you can do this only after the battery is completely discharged. In no case do not do this prematurely, it will reduce performance.

How to understand that the electronic cigarette is charged or completely discharged?
Everything is very simple - the indicator should go out completely when the battery is discharged. Ideally, you need to wait some more time - at least two hours, and only then start charging the battery. Charge to the limit. It is recommended to repeat the procedure two or three times. That is, completely discharge, wait and charge the battery. This is how you can achieve the longest and most faithful battery life.

If you don’t know how much you need to charge an electronic cigarette, carefully read the instructions - this information must be indicated without fail. When the battery is fully ready for use, the color of the indicator changes and the electronic cigarette can be used for its intended purpose.

A few nuances

Usually an electronic cigarette with a charger is already on sale. If you are purchasing a second-hand product, then in this case the charger can be purchased at specialized outlets.
Purchase only the charger that will fully comply with all the requirements of the manufacturer, otherwise you risk damaging the device.

If the vaping unit has already been in use, then you can charge it without prior special discharge, you do not have to wait for a certain charging time, the duration will depend only on the device itself and the type of battery. Do not charge the device longer than the allotted time, it will not lead to anything good.

The time for full charging and discharging, as well as the process itself, may differ, because any technique is individual, although it may be similar to each other.

That is why before the first use, do not be too lazy to get the instructions and carefully study them. This approach can insure you from many problems and breakdowns!

In contact with

Surely everyone knows that a person is weak in front of bad habits, because in modern world almost every day he is exposed to stress, depression, nervous shocks, and in them he sometimes sees the only salvation. It would seem that he smoked - and somehow it became easier on the soul. Unfortunately, such a drug aggravates the situation even more and greatly undermines health, causing heart attacks and strokes, and in some cases tobacco is the only cause of sudden death.

How to quit smoking

At present, the range of tools through which a person can get rid of addiction has significantly expanded: patches, tablets, chewing gums, and so on. Even the electronic cigarette, which is a device that simulates smoking, has been invented. The question of how effective this tool is in the fight against we will put it out of the question, as the experts came to the conclusion that it really weakens the craving for cigarettes.

Indeed, today many smokers buy the above device, hoping for its effectiveness. However, it will be useful for them to learn how to charge an electronic cigarette. Let's consider this question in more detail.

What is an electronic cigarette made of?

It should be noted that a standard electronic cigarette includes: a microprocessor called an atomizer, an air sensor, a battery and a cartridge.

Those who are interested in the question of how to charge an electronic cigarette should know that "filling" liquids are made varying degrees fortresses. When you reduce the amount of nicotine you consume, you can kick the bad habit completely.

Best before date

Those who wish to learn how to charge an electronic cigarette should remember that the operation of the device should not exceed two years.

The battery is responsible for its power, so the kit is usually equipped with a spare battery. We should not forget that batteries vary in capacity and power. The larger the cigarette, the larger the battery. Mini cigarettes can only function for a few hours, while a classic electronic cigarette lasts for 2-3 days.

Before informing the reader about how to charge an electronic cigarette, he should know that battery performance also depends on the frequency of smoking.

Charge your electronic cigarette in time

Remember that an electronic cigarette is the most important procedure that ensures its normal operation.

Do not know how to charge Everything is very simple.

Ordinary socket

The device comes with a cable that connects directly to the power source, that is, to a regular outlet.

After buying an electronic cigarette, immediately put it on charge and only after 8 hours remove the plug from the outlet. In the future, you will not have to wait so long. Naturally, it would be quite logical to ask how much to charge an electronic cigarette for the second and subsequent times. Two or three hours is enough. Also make sure that the battery is fully discharged several times before charging.

Have you not fully figured out how to charge a cigarette yet? It's not difficult at all. The procedure is similar to charging a mobile phone. To ensure uninterrupted operation of the smoking "apparatus", do not forget to feed the battery in a timely manner. Some models of electronic cigarettes are charged exclusively using original chargers, otherwise the thing may fail at the slightest overvoltage.

How do you know when it's time to charge the battery? During the puff, you will notice that the indicator starts flashing - this means that the battery is close to being discharged.

Computer

The battery of an electronic device can be “energized” using a standard computer. To do this, the charger is connected to the USB port of the PC.

Other options

If you are on a long trip and there are no sockets near you, then you can use the cigarette lighter in the car. However, you will need to purchase a cable in advance with which you can do this.

Possible malfunctions

During operation, an electronic cigarette may “falter”, some of them can be fixed on your own. For example, if you record that little smoke is emitted when exhaling, this is clear sign time to charge the battery or replace the cartridge. If you have a complete order with the battery and cartridge, but nevertheless, when tightening, the indicator starts flashing, and there is no smoke at all, then you need to check whether the battery is connected to the battery in a quality manner.

At all, The best way quitting smoking is not starting at all.